Secret Door Hardware – Inside Look at an Upcoming Project
Today, I’ll be previewing the hidden door hardware for an exciting new project with Jeff from Green Street Joinery. We’ll be highlighting the SOSS 518 Hidden Wrap-Around Hinge.
Two Table Saws – Ultimate Woodworking Setup
I’ll be setting up the remodeled shop with the new SawStop Table Saw face to face with the Powermatic, bridging the gap by joining the two saws together.
How to Install Door Casing + Design and Make Wood Molding
When deciding on a molding design for your home one of the most important things to think about is how the molding will end. With this classic design, the baseboard molding will end into the casing in the shoe molding will end into the foot. Thanks for watching and I hope you found this video helpful.
SawStop 3 HP Industrial Cabinet Saw Unboxing & Assembly
In this episode, I unbox and assemble the SawStop 3HP Industrial Cabinet Saw. Be sure to read the owners manuals. It’s a good idea to remove everything from the box and spread all of the parts out on a table. Take inventory of everything and make sure you have all the parts outlined in the assembly instructions. We’ll start with flushing and tightening down the extension wing.
Outdoor Kitchen Winterize and Update
built the outdoor kitchen four years ago. Every year I blow out the water lines and cover the kitchen for the winter season but the counter finish is beginning to fail under the weather. This is a better spring project, so for now, I’ll blow out the water lines and securely cover everything with a tarp for the winter.
New SawStop Table Saw – Shop Upgrade Update
In this episode will take a tour of some of the work I’ve been doing to the shop over the last few months. The shop was a bit dark so I added two more American Green Lights LED shop light fixtures over the table saw and outfeed table. I also installed American green light LED strip lights in the new shed space.
Woodworking Shop Tour at Greene Street Joinery
Recently, I had the pleasure of visiting my good friends Jeff, Rich, and Rob at the Greene Street Joinery in Port Monmouth, NJ for a shop tour of their work space. This group of guys are not only tremendous woodworkers, but also have a strategically crafted set-up that had the wheels turning in my head about how I could improve the workflow of my recently expanded woodworking shop.
Fall Seeding, Great Results in Two Weeks – How To Seed your Lawn
Fall is the best time to seed you lawn and I’m excited to be working with Jonathan Green lawn care to get my lawn in shape this year. As you may know, I love working on my lawn and cutting my own grass and it’s nice to have confidence in a prep and...Expanding The Woodworking Shop – I Should Have Done this Years Ago!
The inside of the shop is about 16 x 24. The building originally had a covered porch that at some point had been closed in. In this video I’ll remove the back wall and gain another 90 ft.² making the shop almost 20% larger. The inside shop measurements are now roughly...Build a Round Dining Table
This is the abbreviated version of the white oak Lily Table. To see the full 30 minute tutorial video here on YouTube click on the link below. Thanks for watching, Jon My Tools: Acme Tools Lily Table Plans: https://jonpeters.com/shop/lily-table-design-plans/ Lily...-
Frame System$150.00
-
Red Flowers Tray # 1$125.00