The Lily Table – Combining Elegance with Strength

The Lily Table is a 60-inch-diameter round dining table made from white oak, combining elegant design with the strength and durability needed for everyday use. Inspired by the shape of a lily pad and the beauty of a lily flower, this table brings together thoughtful details and traditional woodworking techniques.

One of the defining features of this design is the tabletop. Although it is made from substantial 5/4 white oak, the underside is carefully shaped to create a much thinner-looking edge. This gives the table a lighter, more refined appearance without sacrificing strength.

The Lily Table, round white oak dining table
The Lily Table: A 60-inch-diameter round dining table made from white oak.

Combining Quartersawn and Riftsawn White Oak

The tabletop is constructed using a combination of quartersawn and riftsawn white oak. These cuts of lumber offer beautiful grain patterns and a consistent appearance, making them a great choice for a piece of furniture where the wood itself is a major part of the design.

The round shape gives the table a welcoming feel, while the carefully shaped edge adds a distinctive detail that sets it apart from a conventional dining table.

Building the Lily Table tapering jig
Explaining how to build the tapering jig in the project video.

Creating the Tapered Tabletop

The tabletop starts with 5/4 white oak. Rather than simply rounding over the edge, I wanted to create a gradual taper on the underside. The goal was to make the edge appear approximately 1/2 inch thick while keeping the full thickness of the material toward the center.

To accomplish this, I made a custom router jig using 1/2-inch plywood. The jig attaches to the router and pivots around a screw positioned at the center of the tabletop.

Marking the router jig in increments
Marking the jig in 1/4-inch increments.

Building the Router Jig

The jig has a series of holes drilled at 1/4-inch increments. Each hole is approximately 1/8 inch in diameter, allowing the pivot point to be repositioned as the router moves across the underside of the tabletop.

With the center screw acting as a pivot, the router can follow a controlled circular path. This makes it possible to remove material evenly and create the gradual taper needed for the finished edge.

Drilling holes in the router jig
Using the drill press to drill 1/8-inch holes at each 1/4-inch mark.
Attaching the jig to the router base
Attaching the opposite end of the jig to the router base.

Routing the Underside

Using a straight router bit, I worked through the underside of the tabletop in a series of passes. After completing each pass, I moved the center screw to the next hole in the jig and repeated the process.

Each adjustment allowed me to remove another small amount of material, gradually working toward the center of the tabletop. The cuts were made in shallow steps of approximately 1/16 inch, giving me control over the shape and depth of the taper.

Setting the router bit depth
Setting the router bit to the correct depth for shaping the table edge.
Positioning the router jig on the tabletop
Placing the screw at the end of the jig into a small hole drilled in the center of the tabletop.
Making the first router pass
Making the first pass with the router to begin shaping the bevel.
The bevel taking shape on the underside of the tabletop
After several passes, the bevel on the underside of the tabletop is starting to take shape.

Sanding and Refining the Edge

After routing, the underside has a series of small steps where each pass removed material. The next step is sanding those transitions into one smooth, continuous taper.

Close-up of the stepped tabletop bevel
This close-up shows how the bevel steps up with each successive pass.
Completing the tabletop bevel with the router
Making the final pass with the router to complete the bevel.

I started with 60-grit sandpaper to remove the router marks and blend the steps together. From there, I worked through progressively finer grits, finishing at 220 grit.

Sanding the underside of the Lily Table
Using a sander, starting with coarse-grit sandpaper, to blend the stepped edges of the bevel into a smooth, continuous surface.

It's the Small Details That Make the Difference

Furniture design is often about more than the overall shape or the materials used. It's the small details, the subtle curves, the proportions, and the way one element transitions into another, that make a piece feel special.

The tapered underside gives the Lily Table its distinctive appearance. It creates the impression of a much lighter tabletop while preserving the solid construction of the white oak.

The completed Lily Table
A look at the finished Lily Table, featuring its elegant round top and carefully shaped details.

Build Your Own Lily Table

If you'd like to build a Lily Table of your own, you can get the detailed woodworking plans below.

Lily Table woodworking design plans

Woodworking Plans

Lily Table Design Plans

Build your own elegant round Lily Table with the detailed design plans. Bring this distinctive woodworking project into your own shop.

View the Plans
Back to blog
...