Material and cut list for this 10’ x 16’ shed foundation / platform
Material list
  2  – 2×6 x 16’ = ledger boards    pressure treated
13  – 2×6 x 10’ = floor joist      pressure treated
 1   – 2×6 x   8’ = for building up the corners   pressure treated
 4   – 2×4 x 10’ =  for building up the corners and the framing for the apron    pressure treated
 1   – 4×4 x   8′  = corner post  pressure treated
2   – sheets ½ inch treated plywood for the apron
 5   – sheets ¾ inch plywood  for floor
 3   – cans roofing cement
 1   – 12’ x 25’  4 millimeter plastic roll vapor barrier
 3   – boxes 4’ deck screws
 1   – box of washers
 8   – 4.5” lag bolts
Cut List
cut list is only for  ledger boards and joist, other cuts are subject to your building site
 2   – 2×6  x 16’    = frame /   ledger boards
13  – 2×6  x 9’9”  = floor joist